GT Bender Xtra Manual
Model XTRA tube bender is the super heavy duty version of our GT-Bender model Standard for seamless precision tubes of steel and 25CrMo4 Chrome Moly tubes.
This model has thicker frame
plates, larger pin diameters and a die locking mechanism. The die locking
mechanism was designed to prevent the die from relaxing when not bending.
Spring-back is the #1 cause of wrinkling of the tube. This machine is easy to
adjust for tubes with an outer diameter of 20 to 60,33 mm and a wall thickness
between 1,5 to 6,0 mm.
Please note:
Check if the wall thickness of
the required tube diameter lays between the minimum and maximum wall thickness
mentioned at the concerning Die Sets.
Model XTRA die sets and
accessories are not interchangeable with the model Standard die sets and
accessories
Important:
Limited suitability for
stainless steel tubes (304 grade Only) and not suitable for aluminum tubes.
The GT-bender Model XTRA does
not include floor stand and die sets.
The manual control can
optionally upgraded to a hydraulic control.
Strongly recommended if you
are going to bend (a lot of) tubes with a diameter from 45 mm because then the
physical of the user can be a limiting factor.
The following die sets can be
ordered optionally:
Art. nr. |
Ø Outside |
Radius |
Min. WT |
Max. WT |
Die Sets 180° for Round
Tubing |
||||
14703140 |
20 mm |
76 mm |
1,5 mm |
Solid |
14703142 |
22 mm |
89 mm |
1,5 mm |
Solid |
14703145 |
25 mm |
89 mm |
1,5 mm |
Solid |
14703148 |
28 mm |
114 mm |
1,5 mm |
Solid |
14703150 |
30 mm |
114 mm |
1,5 mm |
Solid |
14703152 |
32 mm |
140 mm |
1,5 mm |
Solid |
14703155 |
35 mm |
140 mm |
1,5 mm |
6,0 mm |
14703158 |
38 mm |
140 mm |
2,0 mm |
6,0 mm |
14703160 |
40 mm |
165 mm |
2,0 mm |
6,0 mm |
14703165 |
45 mm |
165 mm |
2,5 mm |
6,0 mm |
14703168 |
48 mm |
165 mm |
2,5 mm |
6,0 mm |
14703170 |
50 mm |
165 mm |
2,5 mm |
6,0 mm |
Die Sets 180° for Square
Tubing |
||||
14703175 |
20x20 mm |
76 mm |
1,7 mm |
4,75 mm |
14703177 |
25x25 mm |
89 mm |
2,1 mm |
4,75 mm |
14703179 |
30x30 mm |
114 mm |
2,1 mm |
4,75 mm |
14703181 |
40x40 mm |
165 mm |
2,4 mm |
4,75 mm |
Die Sets 180° for Gaspipes |
||||
14703210 |
21,34 | = ½” inner |
89 mm |
2,77 mm |
2,77 mm |
14703220 |
26,67 | = ¾” inner |
114 mm |
2,87 mm |
2,87 mm |
14703230 |
33,40 | = 1” inner |
140 mm |
3,38 mm |
3,38 mm |
14703240 |
42,16 |=1¼” inner |
165 mm |
3,56 mm |
3,56 mm |
14703250 |
48,26 |=1½” inner |
165 mm |
3,68 mm |
3,68 mm |
14703260 |
60,33 | = 2” inner |
165 mm |
3,91 mm |
3,91 mm |
Weight | 32.00 |
---|---|
GTIN | 0 |
Tube Capacity | 20-50 mm |
Suitable for | Tubes |
Color | Black |
Material | Steel |
Merk | GT |
Type | Xtra (32) |